SimpleComTools COM1000 Guide de l'utilisateur télécharger pdf (Page 75)

Raven CDMA User Guide for Verizon, version 2.23 69

TCPS=n n = minutes

(TCPS=0) or

seconds

(TCPS=1)

TCP connection time-out (TCPS) units. Specifies a time

interval upon which if there is no in or outbound traffic

through a TCP connection, the connection will be termi

nated.

TCPT=n n = minutes

(TCPT=0) or

seconds

(TCPT=1)

TCP connection time-out (TCPT) units. Specifies a time

interval upon which if there is no in or outbound traffic

through a TCP connection, the connection will be termi

nated.

This value only affects the TCP connection in TCP PAD

mode.

&Cn n=0 | 1 | 2 Set DCD mode.

0 : Always assert DCD.

1 : Assert DCD when in a data mode (UDP, TCP, PPP, or

SLIP) (Default).

2 : Assert DCD when the modem has network coverage.

&Dn n=0 or 2 Set DTR mode.

0 : Ignore DTR, same effect as HW DTR always

asserted (same as S211=1).

2 : Use hardware DTR (same as S211=0).

&Sn n=0 | 1 | 2 Set DSR mode.

0 : Always assert DSR.

1 : Assert DSR when in a data mode (UDP, TCP, PPP, or

SLIP) (Default).

2 : Assert DSR when the modem has network coverage.

Note: S211 can also be used to request that DSR is

always asserted. If S211 is set to 3 and &S is changed to

a non-zero value, S211 will be changed to 1.

TABLE 6. Local Network and Host Modes

Command Parameters Details

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 114 115

Pas de commentaire

SimpleComTools COM1000 Guide de l'utilisateur Page 75