SimpleComTools COM1000 Guide de l'utilisateur télécharger pdf (Page 43)

Raven CDMA User Guide for Verizon, version 2.23 37

Modbus/BSAP Configuration

In the Host Raven’s configuration, instead of IP address for the Addr List (ATM-

LIST or ATMLISTX), substitute a single unique name for each modem, i.e.

remote1, remote2, etc.

When you configure IPManager for the host Raven, make note of your modem

name and domain setting in Wireless ACE in the menu selection Dynamic IP to be

used with the remote modems.

Lors de la configuration de IPManager pour le modèle Raven raccordé à l'hôte,

dans Wireless ACE, relevez le nom du modem ainsi que le nom de domaine corre

spondant à l'aide de l'option de menu Dynamic IP.

FIGURE 6. Wireless ACE: Modem Name and Domain

With names instead of IPs for the Address List, the host Raven will query the DNS

server for the current IP assigned to the specific name of a remote Raven to send a

message coroponding to the ID.

Configuring the Remote Ravens for Modbus with

UDP

You can use either Wireless ACE (page 10), direct serial communication or Telnet

(page

53) to configure the modem using AT commands (page 53). This section

covers standard Modbus, variations may need additional commands.

Port

The destination port for the Raven at the host needs to match the device port in use

on all the Ravens at the remote sites. For example, if the remote Raven’s device

port (see below) is "12345", then the Modbus host Raven's S53 destination port

should be set to "12345".

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 114 115

Pas de commentaire

SimpleComTools COM1000 Guide de l'utilisateur Page 43