SimpleComTools COM1000 Guide de l'utilisateur télécharger pdf (Page 63)

Raven CDMA User Guide for Verizon, version 2.23 57

2. Select COM1 for the Connect Using.

FIGURE 7. HyperTerminal: Comport Setting

3. Change the Bits per Second to 115200 (default), Data Bits to 8, Parity to

None, Stop Bits to 1, and Flow Control to Hardware.

FIGURE 8. HyperTerminal: Comport Settings

4. Type AT and press Enter. You should get a reply of “OK” or “0”. .

5. To see what you are typing as you type it, you will need to turn on the echo and

verbose mode. Type ATE1V1 and press Enter.

6. If you get a reply of “OK”, then you entered the command successfully. If you

get a reply of “0” or “ERROR”, try entering the command again.

AT Command Tables

The tables below list the AT commands, their parameters, and explain what they do.

• For most commands, you need to preface the command with AT (exceptions are

noted), i.e. ATA which listed as A

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 114 115

Pas de commentaire

SimpleComTools COM1000 Guide de l'utilisateur Page 63